Linksys router is not working with a new modem

October 2022 · 5 minute read
router to modem connection problems

XINSTALL BY CLICKING THE DOWNLOAD FILE

To fix various PC problems, we recommend DriverFix:
This software will keep your drivers up and running, thus keeping you safe from common computer errors and hardware failure. Check all your drivers now in 3 easy steps:
  • Download DriverFix (verified download file).
  • Click Start Scan to find all problematic drivers.
  • Click Update Drivers to get new versions and avoid system malfunctionings.

    • Every router device goes dysfunctional at times and so are the Linksys routers. If your router is not working with a new modem, then that’s a pretty annoying problem. This might happen from the very start or you unexpectedly find it had lost connectivity.

    Suspecting a faulty Internet port or Ethernet cable has produced little if any results to mention. You are still facing the same router to modem connection problem.

    Separately, they both work fine. Therefore, you’re most likely looking for ways to cope up with this Linksys router-modem conflict. Follow the methods discussed below to successfully do that.

    What can I do if my Linksys router is not working with a new modem?

    My Linksys router is not working with the Spectrum modem

    1. Reboot the modem, then the router

    cycle the power to Linksys

    Rebooting your router means cycling the power to it. You should first try to unplug the power connector from the back of the router and plug it back in. Rebooting the modem, then the router, and finally the PC restores connectivity most of the time.

    2. Clone the Mac address of your computer

    clone Mac address

  • Open any web browser.
  • Enter the default 192.168.1.1 in the address bar, then press Enter.
  • Enter your login details. The default username is admin and the password is blank.
  • Click OK.
  • In the Setup tab, click the sub-heading called MAC Address Clone.
  • Click the Enable option.
  • Next, click the Clone Your PC’s MAC button.
  • Click Save Settings.

    • Clone the MAC address of your laptop to the route. This should work, and you ought to be all set and ready to surf the Internet.

    You could also power off the Spectrum modem, unplug the coax, and wait a few minutes so that the modem loses the associated MAC address. Then, plug it back in and see if the connection works.

    My Linksys router is not working with the Arris modem

    1. Power cycle your router and the modem

    how to power cycle Linksys

  • Unplug both the modem and the router.
  • Wait for 30 seconds. This allows the short-term memory of the devices to clear completely.
  • Plug the Arris modem back in first.
  • Wait a few more seconds for the modem to connect before turning on the router.

    • There is a difference between resetting a router and rebooting a router. The first fix you should try is to reboot (power cycle) it. This procedure will hardly take a few minutes of your time, so power cycle both your router and the modem.

    2. Change the router’s default IP

    change the router default IP

  • Access your Linksys cloud account.
  • Click Connectivity.
  • Then, click the Local Network tab.
  • Click Edit next to Router Details.
  • Enter the IP address you want for your router.
  • The IP address you may use for the Linksys router can be:
    10.0.0.0 to 10.255.255.255
    172.16.0.0 to 172.31.255.255
    192.168.0.0 to 192.168.255.255

    • Most Arris modems use the default setting for their IP and that will conflict with your router’s DHCP. Try changing your router IP, then reconnect.

    3. Reset the router

    reset the Linksys router

    Everything else left now is pretty much returning to the factory defaults. Reset your Linksys router, then connect your modem to the router. From the router, connect a cable to your computer.

    Expert Tip: Some PC issues are hard to tackle, especially when it comes to corrupted repositories or missing Windows files. If you are having troubles fixing an error, your system may be partially broken. We recommend installing Restoro, a tool that will scan your machine and identify what the fault is.
    Click here to download and start repairing.

    If this doesn’t work, type cmd on your RUN menu (Windows). A black screen window will come up next. Type ipconfig/release, then ipconfig/renew. It should be working after that.

    If you’re having trouble accessing Command Prompt as an admin, then you better take a closer look at this guide.

    My Linksys router is not working with any Comcast modem

    1. Power cycle the devices

    power cycle the router

    Power cycle is just another way of saying that it’s time to turn both your router and Comcast modem off, then on. Rebooting them can often fix connection problems similar to yours, so give a try to this method.

    2. Check ISP MTU requirements

    determine MTU requirements

  • On Windows 10, right-click on the Start button.
  • Select Command Prompt to open the application.
  • Perform a ping test and take note of the results.
  • You’ll receive a reply regarding the correct MTU size.

    • Determining the correct MTU size to resolve intermittent wired connections is imperative. After knowing it, don’t hesitate to change the MTU Size.

    3. Reset the Linksys router

    do a factory reset

    First of all, ensure the port on your computer is enabled. If you turn on Wi-Fi, it disables the Ethernet port. Turn off the modem and do a factory reset on the router by taking a sharp object and pressing down on the Reset button for about 30 seconds.

    After that, unplug and re-plug the router’s power adapter. While it’s booting, plug in a straight cable from the PC to a LAN port on the router. Also, plug in a cat5e or cat6 from the router’s WAN port to the modem.

    Wait until the router finishes booting. If it doesn’t open a browser, then open one by yourself and enter 192.168.1.1 in the address bar. That should get you to log in and solve the issue.

    Remember, a reset like this one erases all settings you have ever changed in the past.

    Worried you must begin re-configuring these settings? Follow this handy guide for help on this important process.

    If this doesn’t work, we would recommend calling your cable ISP and telling them to send a tech who is able to set up the Internet through the router.

    If you have any other questions or suggestions, leave them in the comments section below and we’ll be sure to check them out.

    RELATED STORIES YOU MAY LIKE:

    ncG1vNJzZmivmaOxsMPSq5ypp6Kpe6S7zGijoqabqMa0ec2oq2avn6e4qrrGZq6irJhiurCwxKZm