XINSTALL BY CLICKING THE DOWNLOAD FILE
To fix various PC problems, we recommend DriverFix:This software will keep your drivers up and running, thus keeping you safe from common computer errors and hardware failure. Check all your drivers now in 3 easy steps:Download DriverFix (verified download file).Click Start Scan to find all problematic drivers.Click Update Drivers to get new versions and avoid system malfunctionings.- DriverFix has been downloaded by 0 readers this month.
HP Printers making a buzzing noise is quite common, something that HP acknowledges to be a bug with some of their printer models.
The company, however, explains it’s a known issue with laser printers in general, and not just from HP, which means the solutions mentioned here is applicable to just about any laser printer.
What to do if the HP printer is making buzzing noise?
1. Check the cartridge ink level
Launch the printer application and select Maintenance.Click on the tab that lets you see the estimated ink level remaining. It could be a separate tab or one included under Maintenance.Check if the ink level is less than 20 percent.Generally, according to HP, the cartridges are usable up to 75 percent.The noise is created if the ink level falls below 25 percent. In that case, replace the cartridge immediately.Check to see if the noise is eliminated.2. Re-install the cartridges
Remove all the cartridges and re-insert them again.Ensure the cartridges snap in firmly.Check if the issue is still there.Is your printer RGB or CMYK? Find out with this simple trick!
3. Check power rating
Make sure you plug the printer in directly to the mains, and not to a UPS, power strip and such.Also, printers have definite power ratings. Ensure you are matching voltage rating for it to perform optimally.You will also do good to turn off the printer, remove the power cables and reconnect it again to see if this solves the issue.4. Remove stuck paper or other debris
Turn the printer off.Gently remove the paper tray (if it’s detachable) or bring out the paper sheets.Check if any paper is stuck inside. If so, remove the paper. You can tilt the printer if needed for this operation.Also, check if there are any debris or a foreign object lodged inside. If so, remove them.You might also be needed to open the cleanout door underneath the printer to check for the jammed paper of debris.Reattach the panel after you are done.Similarly, open the cartridge door as well to check for any foreign object that might have intruded the space and is hampering normal functioning.Reattach the panel after you have cleaned the section.5. Ensure the carriage path is devoid of obstructions
For this, you will need to turn the printer on.While the printer is still turned on, remove the power cable from the rear of the printer. It’s extremely vital to disconnect the power source from the printer to prevent chances of an electrical shock.Check if there is any paper stuck or other foreign objects that are restricting the free movement of the carriage.Also, move the carriage manually to ensure free movement later on.For instance, if the carriage is stuck on the right, move it on the left and vice-versa.If the carriage is stuck in the middle, move it to the right.Check if the carriage can be moved freely.Reconnect the printer and print a test page.This is pretty much all you do if your HP printer is making a buzzing noise. However, if the sound is still persisting, get in touch with the support staff.
READ ALSO:
ncG1vNJzZmivmaOxsMPSq5ypp6Kpe6S7zGifqWWgp7avwMSrZKaZm567qHnBrrGzoZ6ceq%2B7yKycaA%3D%3D